Cd (II) Removal from Aqueous Solutions by Adsorption on Henna and Henna with Chitosan Microparticles Using Response Surface Methodology

Document Type : Research Article


Department of Chemical Engineering, Faculty of Engineering, Arak University, P.O. Box 38156-8-8349 Arak, I.R. IRAN


In this research, the capabilities of Henna and Henna with chitosan microparticles adsorbents were studied in order to remove the ion Cd (II). Response Surface Method (RSM) and Central Composite Design (CCD) were used to minimize the number of experiments (21 runs) for Henna and (26 runs) for the Henna with chitosan microparticles. The parameters were pH (2-9), initial solution concentration [10-100 mg/L (ppm)], adsorbent dosage (0.1-1 g) and process time (20-150 min). It was concluded that Cd (II) removal increased from 13.78% to 70.06% with increasing the pH from 2 to 9 (maximum adsorption was at pH 9) for Henna and 82.81% to 97.60% for the Henna with chitosan microparticles. The Cd (II) removal was decreased from 78.73% to 40.44% for Henna and 96.47% to 90.37% for the Henna with chitosan microparticles with increasing the initial solution concentration (from 10 to 100 ppm). Furthermore, the Cd (II) removal was increased from 37.5% to 64.59% for Henna and from 86.74% to 97.76 % for the Henna with chitosan microparticles with the adsorbent dosage increment (from 0.1 to 1 g). The error for the optimum point between the statistical data and experimental ones were at 1.53% for Henna and at 1.61% for the Henna with chitosan microparticles. The Langmuir and Freundlich isotherm models were applied as the adsorption mechanism. Two correlations (with R2=0.9750 for Henna and R2=0.8538 for the Henna with chitosan microparticles) between the Langmuir model and experimental data were investigated‍ although Freundlich model showed the better agreements between the theoretical data and experimental ones (R2=0.9949 for Henna and R2=0.9955 for the Henna with chitosan microparticles). It also showed that the Henna with chitosan microparticles is a fantastic adsorbent for Cd (II) removal.


Main Subjects

[1] Zaini M.A.A., Okayama R., Machida M., Adsorption of Aqueous Metal Ions on Cattle-Manure-Compost Based Activated Carbons, J. Hazard. Mater., 170 (2-3): 1119-1124 (2009).
[2] “WHO Guidelines for Drinking Water Quality: Recommendations”, Vol. 1, 3rd ed., World Health Organization, Geneva (2008).
[3] Vasudevan S., Lakshmi J., Sozhan G., Effects of Alternating and Direct Current in Electrocoagulation Process on the Removal of Cadmium from Water, J. Hazard. Mater., 192 (1): 26-34 (2011).
[4] Elkady M.F., Abu-Saied M.A., Abdel Rahman A.M., Soliman E.A., Elzatahry A.A., Elsayed Yossef M., Mohy Eldin M.S., Nano-Sulphonated Poly (glycidyl methacrylate) Cations Exchanger for Cadmium Ions Removal: Effects of Operating Parameters, Desalination., 279 (1-3): 152-162 (2011).
[5] Ahmad A.L., Kusumastuti A., Derek C.J.C., Ooi B.S., Emulsion Liquid Membrane for Cadmium Removal: Studies on Emulsion Diameter and Stability, Desalination, 287: 30-34 (2012).
[7] Volesky B., Holan Z.R., Biosorption of Heavy Metals, Biotechnol. Prog., 11 (3): 235-250 (1995).
[8] El-Shahawi M.S., Alwael H., Arafat A., Al-Sibaai A.A., Bashammakh A.S., Al-Harbi E.A., Kinetics and Thermodynamic Characteristics of Cadmium (II) Sorption from Water Using Procaine Hydrochloride Physically Impregnated Polyurethane Foam, J.  Ind.  Eng. Chem., 28: 147-152 (2015).
[9] Negm N.A., Sheikh R.E., El-Farargy A.F., Hefni H.H.  Bekhit M., Treatment of Industrial Wastewater Containing Copper and Cobalt Ions using Modified Chitosan, J. Ind. Eng. Chem., 21: 526-534 (2015).
[10] Behbahani M., Najafi F., Amini M.M., Sadeghi O., Bagheri A., Ghareh Hassanlou P., Solid Phase Extraction Using Nanoporous MCM-41 Modified with 3,4-dihydroxybenzaldehyde for Simultaneous Preconcentration and Removal of Gold(III), Palladium(II), Copper(II) and Silver(I)J. Ind.  Eng.  Chem., 20 (4): 2248-2255 (2014).
[11] Abdel-Ghani N.T., Hefny M., El-Chaghaby G.A.F., Removal of Lead from Aqueous Solution Using Low Cost Abundantly Available Adsorbents, Int. J. Environ. Sci. Technol., 4 (1): 67-73 (2007).
[12] Babarinde N.A.A., Babalala J.O., Sanni R.A., Biosorption of Lead Ions from Aqueous Solution
by Maize Leaf
, Int. J. Phys. Sci., 1 (1): 23-26 (2007).
[13] Wong K.K., Lee C.K., Low K.S., Haron M.J., Removal of Cu and Pb by Tartaric Acid Modified Rice Husk from Aqueous Solutions, Chemosphere, 50 (1): 23-28 (2003).
[14] Patel K.P., Tank S., Patel K.M., Patel P., Removal of Cadmium and Zinc Ions from Aqueous Solution
by Using Two Types of Husks
, APCBEE  Procedia, 5: 141-144 (2013).
[15] Vazquez H.A., Cuevas A., Villanueva R., Benavides M.L., Martinez C.R., Cadmium and Lead Removal from Aqueous Solutions Using Pine Sawdust as Biosorbent, J. Appl. Sci. Environ. Sanit. 6(4): 447-462 (2011).
[16] Marković S., Stanković A., Lopičić Z., Lazarević S., Stojanović M., Uskoković D., Application of
Raw Peach Shell Particles for Removal of Methylene Bue
, J. Environ. Chem. Eng., 3(2): 716-724
[18] Zhang L., Zeng Y., Cheng Z., Removal of Heavy Metal Ions Using Chitosan and Modified Chitosan, J. Mol. Liq., 214: 175-191 (2016).
[19] Vakili M., Rafatullah M., Salamatinia B., Abdullah A.Z., Ibrahim M.H., Tan K.B., Gholami Z., Amouzgar P., Application of Chitosan and Its Derivatives as Adsorbents for Dye Removal from Water and Wastewater: A Review, Carbohydr. Polym., 113: 115-130 (2014).
[20] Montgomery D.C., “Design and Analysis of  Experiments”,  6th  ed.,  John Wiley & Sons Inc., New York (2005).
[21] Wu C.F.J., Hamada M.S., “Experiments:  Planning, Analysis and Optimization”, 2nd ed., John Wiley & Sons Inc., New York (2011).
[23] Freundlich H.M.F., Over the Adsorption in Solution, J. Physical Chem. 57: 385-470 (1906).
[24] Langmuir I., The Constitution and Fundamental Properties of Solids and Liquids, J. American Chemical Soc., 38 (11): 2221-2295 (1916).
[25] Preetha B., Viruthagiri T., Application of Response Surface Methodology for the Biosorption of Copper Using Rhizopus Arrhizus, J. Hazard. Mater., 143(1-2): 506-510 (2007).
[27] Sheng Z., Li J., Li Y., Optimization of Ultrasonic Assisted Extraction of Phillyrin from Forsythia Suspense Using Response Surface Methodology, J. Medicinal Plants Res., 6 (9): 1633-1644 (2012).
[28] Hosseini S.M., Khosravi-Darani K., Mohammadifar M.A., Nikoopour H., Production of Mycoprotein by Fusarium Venenatum Growth on Modified Vogel Medium, Asian J. Chem., 21(5): 4017-4022 (2009).
[29] Dean A., Voss D., “Design and Analysis of Experiments”. Springer (1999).
[30] Hydari Sh., Sharififard H., Nabavinia M., Parvizi M., A Comparative Investigation on Removal Performances of Commercial Activated Carbon, Chitosan Biosorbent and Chitosan/Activated Carbon Composite for Cadmium, Chemical Eng. J., 193-194: 276-282 (2012).
[31] Larous S., Meniai A.-H., Bencheikh Lehocine M., Experimental Study of the Removal of Copper from Aqueous Solutions by Adsorption Using Sawdust, Desalination., 185 (1-3): 483-490 (2005).
[32] Chubar N., Carvalho J.R., Neiva Correia M.J., Cork Biomass as Biosorbent for Cu(II), Zn(II) and Ni(II), Colloids  Surf.  A 230 (1-3): 57-65 (2003).
[34] Zhao Y., Yang S., Ding D., Chen J., Yang Y., Lei Z., Effective Adsorption of Cr (VI) from Aqueous Solution Using Natural Akadama Clay, J. Colloid Interface Sci., 395: 198-204 (2013).
[35] Seyedi S.M., Anvaripour B., Motavassel M., Jadidi N., Comparative Cadmium Adsorption from Water by Nanochitosan and Chitosan, Int. J. Eng. and Innov. Technol., 2(9): 145-148 (2013).
[36] Li M., Zhang Z., Li R., Wang J., Ali A., Removal of Pb(II) and  Cd(II) Ions from Aqueous Solution
by Thiosemicarbazide Modified Chitosan
, Int. J. Biological Macromolecules, 86: 876-884 (2016).
[37] Govindarajan C., Ramasubramaniam S. Gomathi T., Sudha P.N., Studies on Adsorption Behavior of Cadmium onto Nanochitosan-carboxymethyl Cellulose Blend, Archives of Applied Sci. Res., 3(5): 572-580 (2011).
[38] Kadirvelu K., Namasivayam C., Activated Carbon from Coconut Coirpith as Metal Adsorbent: Adsorption of Cd(II) from Aqueous SolutionAdvances in Env. Res., 7(2): 471-478 (2003).
[39] Hanif M.A., Nadeem R., Bhatti H.N., Rashid Ahmad N., Ansari T.M., Ni (II) Biosorption by Cassia Fistula (Golden Shower) Biomass, J. Hazard. Mater., 139(2): 345-355 (2007).
[41] Yang S., Zhao D., Zhang H., Lu S., Chen L,. Yu X., Impact of Environmental Conditions on the Sorption Behavior of Pb(II) in Na-Bentonite SuspensionsJ. Hazard. Mater., 183 (1-3): 632-640 (2010).
[42] Gode F., Atalay E.D., Pehlivan E., Removal of Cr (VI) from Aqueous Solutions Using Modified Red Pine Sawdust, J. Hazard. Mater., 152(3): 1201-1207 (2008).
[43] Neyaz N., Siddiqui W.A., Removal of Cu (II) by Modified Magnetite Nanocomposite as a Nanosorbent, Int. J. Sci. Res., 4(2): 1868-1873 (2015).
[46] Venkata Ramana D.K., Kumar H., Reddy D., Su Yu J., Seshaiah K., Pigeon Peas Hulls Waste as Potential Adsorbent for Removal of Pb(II) and Ni(II) from Water, Chem. Eng. J., 197: 24-33 (2012).
[48] Rangel-Mendez J.R., Monroy-Zepeda R., Leyva-Ramos E., Diaz-Flores P.E., Shirai K. Chitosan Selectivity for Removing Cadmium (II), Copper (II), and Lead (II) from Aqueous Phase: pH and Organic Matter Effect, J. Hazard. Mater., 162(1): 503-511 (2009).
[49] Karaoglu M.H., Zor S., Ugurlu M., Biosorption of Cr (III) from Solution Using Vineyard Pruning Waste, Chem. Eng. J., 159 (1-3): 98-106 (2010).