Department of Chemistry, Shiraz University, Shiraz, I.R. IRAN
10.30492/ijcce.1993.10397
Abstract
Sulphide was determined spectrophotometrically at 628 nm and pH 6.7 based on its catalytic reduction of toluidine blue in the presence of Se(IV) using a flow injection system. After optimization of the measuring conditions the calibration curve was found linear up to 25 mg/mL and the detection limit was 0.3 mg/mL (30 mL injections). The relative standard deviation for the determination of 10 mg/mL sulphide was 1.2% (n=14). The injection rate was 30 h-1.
Shamsipur, M., & Mousavi, M. F. (1993). Flow Injection Spectrophotometric Determination of Sulphide by Catalytic Reduction of Toluidine Blue. Iranian Journal of Chemistry and Chemical Engineering, 12(2), 69-72. doi: 10.30492/ijcce.1993.10397
MLA
Mojtaba Shamsipur; Mir Fazlollah Mousavi. "Flow Injection Spectrophotometric Determination of Sulphide by Catalytic Reduction of Toluidine Blue". Iranian Journal of Chemistry and Chemical Engineering, 12, 2, 1993, 69-72. doi: 10.30492/ijcce.1993.10397
HARVARD
Shamsipur, M., Mousavi, M. F. (1993). 'Flow Injection Spectrophotometric Determination of Sulphide by Catalytic Reduction of Toluidine Blue', Iranian Journal of Chemistry and Chemical Engineering, 12(2), pp. 69-72. doi: 10.30492/ijcce.1993.10397
VANCOUVER
Shamsipur, M., Mousavi, M. F. Flow Injection Spectrophotometric Determination of Sulphide by Catalytic Reduction of Toluidine Blue. Iranian Journal of Chemistry and Chemical Engineering, 1993; 12(2): 69-72. doi: 10.30492/ijcce.1993.10397