[1] Verlaan C.C.J., Performance of Nvel Mst Eiminators, Ph.D. Tesis, Delft Univ. of Technol., Faculty of Mech.Eng.and Mar. technol, ISBN 90-370-0054-1 (1991).
[2] Wang W., Davies G.A., CFD Studies of Separation of Mists From Particles Using Vane Type Separators, Trans. IChemE, Part A, Chem. Eng. Res. Des., 76, 980 (1996).
[3] Galletti Ch., Brunazzi E., Tognotti, L., A Numerical Model for Gas Flow and Droplet Motion in Wave-Plate Mist Eliminators with Drainage Channels, Chem. Eng. Sci., 63, 5639 (2008).
[4] Ghetti S., Investigation of Entrainment Phenomena in Inertial Separators. MS Thesis, Univ. fPisa, Pisa, Italy(2003).
[5] Jøsang A.I., Melaaen M.C., "Detailed Measurements and Simulations of a Vane Separator", Int. Conf. on Appl. Computational Fluid Dynamics, October 17-20,Beijing,China(2000).
[6] Kallio G.A., Reeks M.W., A Numerical Simulation of Particle Deposition in Turbulent Boundary layers, Int. J. Multiphase Flow, 15(3), 433, (1989).
[7] Sommerfeld M., Kohnen G., Ruger M., Some Open Questions and Inconsistencies of Lagrangian Particle Dispersion Models, Ninth Symp. Turbulent Shear Flows,Kyoto,Japan, 16-18 August (1993).
[8] Wang Y., James P.W., Assessment of an Eddy Interaction Model and its Refinements Using Predictions of Droplet Deposition in a Wave Plate Vane separator, Trans. IChem E, Part A, Chem. Eng. Res. Des., 77, 692, (1999).
[9] James P.W., B.J. Azzopardi, Y. Wang, J.P. Hughes, The Role of Drainage Channels in the performance of Wave Plate Mist Eliminators, Trans. IChem E., Part A, Chem. Eng. Res. Des., 81, 639, (2003).
[10] James P.W., Azzopardi B.J., Wang Y., Hughes J. P., A Model for Liquid Film Flow and Separation in a Wave Plate Mist eliminator, Trans. IChem E., Part A, Chem. Eng. Res. Des., 83(A5), 469, (2005).
[11] Launder B.E., Spalding D.B., the Numerical Computation of Turbulent Flows, Comp. Meth. Appl. Mech. Eng., 3, 269, (1974).
[12] Rafee R., Rahimzadeh H., Ahmadi G., Numerical Simulations of Airflow and Droplet Transport in a Wave-Plate Mist Eliminator, Chem. Eng. Res. Des., 88, p. 1393 (2010).
[13] Jøsang A.I., Melaaen M.C., "Fluid Flow Simulation of Vane Separator", 42nd Scandinavian Conf. on Simulation and Modeling,Porsgrunn,Norway, October 8-9, (2001).
[14] Launder, B.E., Shima N., Second-Moment Closure for the Near-Wall Sublayer: Development and Application, AIAA J., 27(10), 1319, (1989).
[15] Launder B.E., Second-Moment Closure: Present … and Future? Int. J. Heat Fluid Flow, 10(4): 282-300, (1989).
[16] Lien F.S., Leschziner M.A., Assessment of Turbulence-Transport Models Including Non-Linear RNG Eddy-Viscosity Formulation and Second-Moment Closure for Flow over a Backward-Facing Step, Computers Fluids, 23(8): 983-1004, (1994)
[17] Lien F.S., A Pressure Based Unstructured Grid Method for All Speed Flows, Int. J. Numerical Methods Fluids, 33, 355, (2000).
[18] Rafee R., Rahimzadeh H., A New Method for Constructing the Coefficients of Pressure Correction Equation for Collocated Unstructured Grids, Am. J. Appl. Sci. 6(1), 93, (2009).
[19] Patankar S.V., "Numerical Heat Transfer and Fluid Flow",McGraw-Hill,New York, pp: 126-131, (1980).
[20] Jongen T., Simulation and Modeling of Turbulent Incompressible Flows, Ph.D. thesis, EPF Lausanne, Lausanne, Switzerland, (1992).
[21] Wolfstein M., The Velocity and Temperature Distribution of One-Dimensional Flow with Turbulence Augmentation and Pressure Gradient, Int. J. Heat Mass Transfer, 12, 301, (1969).
[22] Kader B., Temperature and Concentration Profiles in Fully Turbulent Boundary Layers, Int. J. Heat Mass Transfer, 24(9), 1541, (1981).
[23] Jøsang A.I., Numerical and Experimental Studies of Droplet-Gas Flow, Ph.D. Thesis, Dep. of Technol. (HiT-TF), Telemark Univ. Coll. , Norway, (2002).
[24] Chan J.K., Golay M.W., "Comparative Evaluation of Cooling Tower Drift Eliminator Performance",
Dep. of NuclearEng. of Massachusetts Inst. of Technol.Cambridge,Massachusetts, (1977).
[25] Zhao J., Jin, B., Zhong Z., Study of the Separation Efficiency of a Vane Separator Vane with Response Surface Methodology, J. Hazard. Mater. ,147, 363, (2007).
[26] He Ch., Ahmadi G., Particle Deposition in a Nearly Developed Turbulent Duct Flow with Electrophoresis,
J. Aerosol Sci. 30(6), 739, (1999).
[27] Liu A.B., Mather D., and Reitz R.D., Modeling the Effects of Drop Drag and Breakup on Fuel Sprays, SAE Technical Paper 930072, SAE, (1993).
[28] Hinds W.C., "Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles", Wiley, NewYork, (1982).
[29] Lamb H., "Hydrodynamics", Sixth Edition,DoverPublications,New York, (1945).
[30] Saffman P.G., The Lift on a Small Sphere in a Slow Shear Flow, J. Fluid Mech. 22, 385, (1965).