[1] Basov, V. A., Markhevka, V. I., Melik-Akhnazarov, T. Kh. and Orochko, D. I., Investigationof the structure of a non-uniform fluidised bed, Inter-national Chemical Engineering, 9,263 (1969).
[2] Wu, C. S. and Whiting, W. B., Interacting jets in a fluidised bed, Chemical Engineering and Commu-nications, 73, 1 (1988).
[3] Blake, T.B., Webb, H., Sunderland, P.B., The non-dimensionalisation of equations describing flui-disation with application to the correlation of jet penetration height,Chemical Engineering Science, 45, 365 (1990).
[4] Mathur, K. B. and Gishler, D. E., A technique for contacting gases with coarse solid particles, Journal of American Institute of Chemical Engineers, 1, 157 (1955).
[5] Merry, J. M. D., Penetration of vertical jets into fluidized beds, Journal of American Institute of Chemical Engineers, 21, 507 (1975).
[6] Yang, W. C. and Keairns, D., Estimating the jet penetration depth of multiple vertical grid jets, IndustrialEngineeringChemistryand Fundamentals, 18, 317 (1980).
[7] Richner, D.W, Minoura, T., Princhet, J.W. and Blae, T.R., Computer simulation of isothermal fluidization in large scale laboratory rigs, Journal of American Institute of Chemical Engineers, 36, 361 (1990).
[8] Hong, R.H., Li, H.Z., Li, H. B. and Wang, Y., Studies on the inclined jet penetration length in a gas-solid fluidized bed, Powder Technology, 92, 205 (1997).
[9] Hong, R.Y., Guo, Q.J., Luo, G.H.,Zhang, J.Y. and Ding, J., On the jet penetration height in fluidized beds with two vertical jets, Powder Technology, 133, 216 (2003).
[10] Massimilla, L. “Gas jets in fluidised beds”, in: Davidson, J.F., Clift, R., and Harrison, D., (Eds.), Fluidisation II, Academic Press, London, p.133 (1985).
[11] Lefroy, G.A. and Davidson, J.F., The mechanics of spouted beds, Transactions of Institution of Chemical Engineers, 47, T120 (1969).
[12] Massimilla, L. and Westwater, Journal of Institute of Chemical Engineers, 9,132 (1959).
[13] Suciu, G.C. and Patrascu, M., Particle circulating in a spouted bed, Powder Technology, 19, 109 (1978).
[14] Chiba, T., Terashima, K. and Kobayashi, K., Lateral distribution of bubble sizes in two dimensional gas-fluidised beds, Journal of Chemical Engineering of Japan, 6, 167 (1975).
[15] Saxena, S.C., Marthur, A. and Sharma, G.K., Bubble dynamic and elutriation studies in gas fluidized beds, Chemical Engineering and Communications, 20, 35 (1984).
[16]Van Velzen, D. V., Flamm, H.J., Langenkamp, H., Casile, A., Motion of solids in spouted bed, Can. J. Chemical Eng., 52 156 (1974).
[17] Roy, D., Larachi, F., Legros, R. and Chauoki, J., A study of solids behaviour in a spouted bed using 3-D tracking, CanadianJournalofChemical Engineering, 52, 561 (1994).
[18] Stein, M., Ding, Y. L. and Seville, J. P. K., Experimental verification of the scaling relationships for bubbling gas fluidised beds using the PEPT technique, Chemical Engineering Science, 57, 3649 (2002).
[19] Bolous, M. I. and Waldie, B., High Resolution Measurement of Particle Velocities in a Spouted Bed Using Laser-Doppler Anemometry, Canadian Journal of Chemical Engineering, 64, 939 (1986).
[20] He, Y.L., Lim, C.J., Grace, J.R., Zhu, J.X. and Qin, S.Z., Particle velocity profile and solid flow pattern in spouted beds, Canadian Journal of Chemical Engineering, 72, 229 (1994).
[21] Makkawi, Y. T. and Wright, P. C., The voidage function and effective drag force for fluidized beds, Chemical Engineering Science, 58, 2035 (2003).
[22] Lim, K. S., Agarwal, P. K. and O’Neill, B. K., Measurement and modelling of bubble parameters in a two-dimensional gas fluidized bed using image analysis, PowderTechnology, 60, 159 (1990).
[23] Lim, K. S., Agarwal, P. K., Bubble velocity in fluidized beds: the effect of non vertical bubble rise on its measurement using submersible probes and it’s relationship with bubble size, Powder technol., 69, p. 239(1992).
[24] Agarwal, P. K., Hull, A. S. and Kim, K. S., Digital image analysis techniques for the study of bubbling fluidized beds, in Chapter 12 of “Non-invasive monitoring of multiphase flows”,Chaouki, J., Larachi, F. and Dudukovic, M.P., (Eds), p. 407 (1996).
[25] Saadevandi, A. and Turton, R., The application of computer-based imaging to the measurements of particle velocity and voidage profiles in a fluidized bed, Powder Technology, 98, 183 (1998).
[26] Goldschmidt, M.J.V., Link J. M., van Swaaij, W. P. M., “Fluidization X” Hydrodynamic modeling of dense gas-fluidized beds: validation of a multi-fluid continuum model with non-intrusive digital image analysis measurements, Kwauk, M., Li, J. and Yang W.C., (Eds.), p.405 (2000).
[27] Goldschmidt, M.J.V., Hydrodynamic modelling of fluidized bed spray granulation, PhD thesis, (2001). Hong, R.H., Li, H.Z., Cheng, M.Y., and Zhang, J.Y., Numerical simulation and verification of a gas-solid jet fluidised bed, Powder Technology, 87, 73 (1996).
[28] Stein, M., Ding, Y.L., Seville, J.P.K. and Parker, D.J., Solids motion in gas bubbling fluidised beds, Chemical Engineering Science, 55, 5291 (2000).
[29] Abramovich, G. N., The theory of turbulent jets, M.I.T. Press,Cambridge, Massachusetts(1963).
[30] Michele, G. De., Elia, A. and Massimilla, L., The intraction between jets and fluidized beds,Ing. Chim. Ital., 12 (11-12) (155-162) (1976).
[31] Schlichting, H., Grrenzschicht-theorie, Vol. 5, Verlag G.Braun, Karlsruhe, Auflage (1965).
[32] Donsi, G., Massimilla, L. and Colantuoni, L., The dispersion of axi-symetric gas jets in fluidized beds, in grace and matsen(eds), “fluidization”, Plenum, New York, 1(980).
[33] Aisa, L., Garcia, J. A., Cerecedo, L. M., Garcia Palacin, I., Calvo, E., Particle concentration and local mass flux measurements in two-phase flows with PDA. Application to a study on the dispersion of spherical particles in a turbulent air jet, International Journal of Multiphase flow,28 p. 301 (2002).