[1] Mathur, K.B. and Gishler, P.E., A technique for contact gases with coarse solid particles, AIChE J., 1, 157 (1955).
[2] Mathur, K.B. and Epstein, N., “Spouted Beds”, Academic press,New York (1974).
[3] Kmiec, A., Hydrodynamics of flows and heat transfer in spouted beds, Chem. Eng. J., 19, 189 (1980).
[4] Sayles, D.C. and Ala, H., Microwave drying of ammonium perchlorate grinding spheres, US patent, 4, 513 (1985).
[5] Mujumdar, A.S., Recent developments in spouted bed drying, keynote lecture, Transport Process in Porous Media Conference, Saocarlos. S.P., Brazil, (1989)
[6] Olazar, M., San jose, M.J., Aguayo, A.T., Arandes J.M., Pressure drop in conical spouted beds, Chem. Eng. J., 51, 53 (1995).
[7] Davahastin, S., Mujumdar, and Raghavan, G.S., Hydrodynamic characteristics of a rotary jet annular spouted bed, J. Powder Technology, 103, 169 (1999).
[8] Wang, Z.H. and Chen, G., Heat and mass trasfer during low intensity convective drying, Chem. Eng. Sci., 54, 3899 (1999).
[9] Mola, D. and Montazeri, H., Evaporation condensation and coagulation processes, J. Aerosol Sci., 31, 5793 (2000).
[10] Wang, Z.H. and Chen, G., Heat and mass trasfer in batch fluidized bed drying of porous particles, Chem. Eng. Sci., 55, 1857 (2000).
[11] Kalbasi, M., Mehraban, M.R., The effect of surface water vapour flux on drying of potato, Trans
IChem. Eng., 78, 204 (2000).
[12] Hattori, H., Morimoto, T., Yamaguchi, M., Onez-awa, T. and Avac, C., Drying of porous solid particles in various-shaped spouted bed with a draft-tube, J. Chem. Eng. of Japan, 34, 1549 (2001).
[13] Wang, Z., Chen, P., Li, H., Wu. C. and Chen,Y., Study on the hydrodynamics of a spouting-moving bed, Ind. Eng. Chem. Res., 40, 4983 (2001).
[14] Davidson, J. F., Thorpe, R. B., Al-Mansouri, O., Kwaong, H., Peck, M. and Williamson, R., Evaporation of water from air-fluidized porous particles, Chem. Eng. Sci., 56, 6089 (2001).
[15] Kalbasi, M., Heat and moisture transfer model for onion drying, Drying Technology, 21, 1575 (2003)
[16] Perry, R.H. and W .Green, D., “Perry's Chemical Engineers Handbook”, 5th Ed., McGrow-Hill Book Company, New York (1997).