Preparation of PMMA/MWNTs Nanocomposite Microcellular Foams by In-situ Generation of Supercritical Carbon Dioxide

Document Type : Research Article

Authors

Department of Polymer Engineering, Science and Research Branch, Islamic Azad University, P.O. Box 1477893855 Tehran, I.R. IRAN

Abstract

Nanocomposites containing poly(methyl methacrylate) (PMMA) and surface functionalized Multi-Walled Carbon Nanotubes (MWNTs) were synthesized. The dispersion of MWNTs in PMMA was characterized using Transmission Electron Microscopy (TEM).The synthesized nanocomposites were successfully foamed using a simple method based on the in-situ generation of supercritical carbon dioxide (CO2). This method in contrast with conventional methods exempted from high-pressure pump and separated CO2 tank. The effect of MWNTs concentration, saturation temperature and saturation pressure on cellular morphology of the prepared microcellular foams were studied by Scanning Electron Microscopy (SEM), and average cell size and cell density of the prepared foams were studied by image analysis. An increase in cell density, as well as a reduction of cell size, was observed with an increase in the concentration of carbon nanotubes. It was also observed that an elevation of saturation temperature from 90 °C to 100 °C, at constant saturation pressure, leads to a higher cell density and a lower average cell size. Furthermore, an increase in saturation pressure results in a decrease in average cell diameter as well as an increase in cell density. However, the effects of MWNTs concentration on both of average cell size and cell density were proved to be more striking than those of saturation pressure. 

Keywords

Main Subjects


[1] Klempner D., Sendijarevic V. in: “Handbook of Polymeric Foams and Foam Technology”, Hanser Gardner Publications, Cincinnatti (2004).
[2] Jenkins M.J., Harrison K.L., Silva M.M., Whitaker M.J., Shakesheff K.M., Howdle S.M., Characterisation of Microcellular Foams Produced from Semi-crystalline PCL Using Supercritical Carbon Dioxide, Eur. Polym. J., 42(11): 3145-3151 (2006).
[4] Kazemi Beydokhti K., Behravesh A.H., Azdast T., An Experimental Study on Mechanical and Microstructural Properties of Microcellular Foams of ABS Composites, Iran. Polym. J., 15(7): 555-67 (2006).
[5] Arab-Baraghi M.,  Jahanmardi R., Mohammadizadeh M., A Simple Method for Preparation of Polymer Microcellular Foams by in Situ Generation of Supercritical Carbon Dioxide from Dry Ice, Iran. Polym. J., 23(6): 427-435 (2014).
[6] Zeng C., Han X., Lee L.J., Koelling K.W., Tomasko D.L., Polymer–Clay Nanocomposite Foams Prepared Using Carbon Dioxide, Adv. Mater., 15(20): 1743–1747 (2003).
[7] Masoomi M.Y., Morsali A., Applications of Metal-Organic Coordination Polymers as Precursors for Preparation of Nano-Materials, Coord. Chem. Rev., 256 (23-24): 2921–2943(2012).
[8] Masoomi M.Y., Morsali A., Morphological Study and Potential Applications of Nnano Metal-Organic Coordination Polymers, RSC Adv., 3 (42): 19191-19218 (2013).
[10] Jahanmardi R., Kangarlou B., Ranjbarzadeh-Dibazar A., Effects of Organically Modified Nanoclay on Cellular Morphology, Tensile Properties, Anddimensional Stability of Flexible Polyurethane Foams, J. Nanostruct. Chem., 3: 82 (2013).
[11] Ganjkhanlou Y., Bayandori-Moghaddam A., Hosseini S., Nazari T., Gazmeh A., Badraghi J., Application of Image Analysis in the Characterization of Electrospun Nanofibers, Iran. J. Chem. Chem. Eng. (IJCCE), 33(2): 37-45 (2014).
[12] Faghihian H., Rasekh M., Removal of Chromate from Aqueous Solution by a Novel Clinoptilolite-Polyanillin Composite, Iran. J. Chem. Chem. Eng. (IJCCE), 33(1): 45-51 (2014).
[13] Zeng C., Hosseiny N., Zhang C., Wang B., Synthesis and Processing of PMMA Carbon Nanotube Nanocomposite Foams, Polymer, 51(3): 655–664 (2010).
[14] Lee L.J., Zeng C., Cao X., Han X., Shen J., Xu G., Polymer Nanocomposite Foams, Compos. Sci. Technol., 65(15-16): 2344-2363 (2005).
[15] Shen J., Han X., Lee L.J., Nanoscaled Reinforcement of Polystyrene Foams Using Carbon Nanofibers, J. Cell. Plast., 42(2): 105-126 (2006).
[16] Lee S.Y., Xu Y.X., Hanna M.A., Tapioca Starch-Poly (lactic acid)-Based Nanocomposite Foams as Affected by Type of Nanoclay, Int. Polym. Process, 22(5): 429–435 (2007).
[17] VanHouten D.J., Baird D.G., Generation and Characterization of Carbon Nano-Fiber-Poly(arylene ether sulfone) Nanocomposite Foams, Polymer, 50(8): 1868–1876 (2009).
[18] Yang Y., Gupta M.C., Dudley K.L., Lawrence R.W., Novel Carbon Nanotube-Polystyrene Foam Composites for Electromagnetic Interference Shielding, Nano Lett., 5(11): 2131-2134 (2005).
[19] Baughman R.H., Zakhidov A.A., de Heer W.A., Carbon Nanotubes-the Route toward Applications, Science, 297(5582): 787-792 (2002).
[20] Tavasoli A., Karimi S., Zolfaghari Z., Taghavi, S., Amirfirouzkouhi, H., Babatabar, M., Cobalt Loading Effects on the Physico-Chemical Properties and Performance of Co Promoted Alkalized MoS2/CNTs Catalysts for Higher Alcohols Synthesis, Iran. J. Chem. Chem. Eng. (IJCCE), 32(1): 21-29 (2013).
[21] Shen J., Zeng C., Lee L.J., Synthesis of Polystyrene–Carbon Nanofibers Nanocomposite Foams, Polymer, 46(14): 5218-5224 (2005).
[22] Park K.-W., Kim G.- H., Ethylene Vinyl Acetate Copolymer (EVA)/Multi-walled Carbon Nanotube (MWCNT) Nanocomposite Foams, J. Appl. Polym. Sci., 112(3): 1845-1849 (2009).
[23] Kwon Y.-K., Bae H.-K., Production of Microcellular Foam Plastics by Supercritical Carbon Dioxide, Korean J. Chem. Eng., 24: 127-132 (2007).
[24]. Huang S., Wu G., Chen S., Preparation of Open Cellular PMMA Microspheres by Supercritical Carbon Dioxide Foaming, J. Supercrit. Fluid., 40(2): 323-329 (2007).
[25] Atkins P., de Paula J., in: “Atkins’ Physical Chemistry”, 8th ed., Oxford University Press, Oxford, p. 1067 (2006).
[26] Wee D, Seong D.G., Youn J.R., Processing of Microcellular Nanocomposite Foams by Using A Supercritical Fluid, Fiber. Polym., 5(2): 160-169 (2004).
[27] Kashiwagi T., Fagan J., Douglas J.F., Yamamoto K., Heckert A.N., Leigh S.D., Obrzut J., Du F., Lin-Gibson S., Mu M., Winey K.I., Haggenmueller R., Relationship between Dispersion Metric and Properties of PMMA/SWNT Nanocomposites, Polymer, 48 : 4855-4866 (2007).
[29] Mohammad M., Karen I.W., Polymer Nanocomposites Containing Carbon Nanotubes, Macromolecules, 39(16): 5194-5205 (2006).