TY - JOUR ID - 7615 TI - Evaluation of Parameters Influencing Hexavalent Chromium Mist Sampling: A Full Factorial Design JO - Iranian Journal of Chemistry and Chemical Engineering JA - IJCCE LA - en SN - 1021-9986 AU - Tirgar, Aram AU - Golbabaei, Farideh AU - Nourijelyani, Keramat AU - Akbar Kanzadeh, Farhang AU - Shahtaheri,, Sayed Jamaleddin AU - Ganjali, Mohammad Reza AU - Hamedi, Javad AD - School of Public Health, Medical Sciences / University of Tehran, Tehran, I.R. IRAN AD - Medical University of Ohio at Toledo, P.O. Box 43614 Ohio, U.S.A AD - School of Public Health, Center for Environmental Research, Medical Sciences / University of Tehran, Tehran, I.R. IRAN AD - School of Chemistry, University of Tehran, P.O. Box 14155-8464 Tehran, I.R. IRAN Y1 - 2007 PY - 2007 VL - 26 IS - 4 SP - 115 EP - 121 KW - Hexavalent chromium KW - Mist KW - electroplating KW - Chromium sampling method KW - Sampling head KW - Sampling duration KW - Storage duration KW - Sampling height DO - 10.30492/ijcce.2007.7615 N2 - A chromium electroplating bath with the ability to produce homogenous mist was used to evaluate parameters influencing hexavalent chromium (Cr+6) mist sampling methods. The results of 48 Cr+6mist samples collected using the U.S. National Institute for Occupational Safety and Health method 7600showed that Cr+6concentration was higher: (1) For sampling by closed-face filter cassettes than for sampling by open-face filter cassettes (P <0.001); (2) for samples collected at 35 cm above the electroplating solution surface than for samples collected at 50 cm (P <0.001); (3) for sampling duration of 30 minutes than for sampling duration of 180 minutes (P <0.001); and, (4) for samples extracted immediately after sampling than for samples with delayed extraction (24 hours after sampling) (P <0.001). It is concluded that the accuracy of Cr+6 mist sampling in electroplating shops will be enhanced when: (1) closed-face filter cassette is used to prevent liquid splash contamination; (2) the recommended sampling height is 35 cm above the solution surface; (3) the sampling duration is short--approximately 30 minutes; and, (4) the extraction of the Cr+6 sample is performed as soon as the sampling is completed.   UR - https://ijcce.ac.ir/article_7615.html L1 - https://ijcce.ac.ir/article_7615_b86928f0fe2042e4e03260d099051671.pdf ER -